Dominance Solving Shotgun Sight SGS-100 Mk2

Name: Dominance Solving Shotgun Sight SGS-100 Mk2
SKU: SGS-100-Mk2
Price: 34.99 GBP
Availability: InStock

£34.99

Our dominance solving shotgun sight comes supplied with 2 fiber optic colours Red & Green, that can be changed in seconds. It also is supplied with an Allen key and a spare screw. As will all our products, it will be shipped 1st class and can be tracked.

Vent Rib Width

Clear

SKU: SGS-100-Mk2 Category: Shotgun Sight

Description
Additional information

Description

Dominance Solving Shotgun Sight

How does this Dominance Solving Shotgun Sight actually solve cross eye dominance?

To answer that question, it is necessary explain what cross eye dominance is. If you close an eye to ensure you have proper EYE + BEAD + TARGET line of sight, you have cured your cross eye dominance but have created another massive problem. I will explain why in detail later. Most left-handed people tend to mount a rifle on their left shoulder, similarly, most right-handed people tend to mount a rifle on there right shoulder. If you are right-handed and right eye dominant you don’t have a problem. If you are left-handed and left eye dominant you don’t have a problem. Why? because the eye nearest to the shoulder the rifle is mounted on is doing the alignment of EYE + BEAD + TARGET. The image below shows that everything is naturally in-line and good to go! Our dominance solving shotgun sight will solve the issue instantly.

1st illustration

If you are cross eye dominant, the eye nearest to the shoulder the rifle is mounted on is NOT doing the alignment of EYE + BEAD + TARGET. The 2nd illustration below shows a right-handed shooter with rifle mounted on right shoulder but left eye dominant. The reason this is a problem is that the alignment is being done by the LEFT eye + BEAD + TARGET. The assumption here is that you have both eyes open as you should!

2nd illustration

The above image is not to scale and the error down range is far more severe than depicted. Why is the LEFT eye doing the alignment and not the right eye. When you look at an object with both eyes open, you see two images. One image from each eye. The Brain ignores one of the images, it only register’s the image seen by the dominant eye. As far as the shooters is concerned, the BEAD + TARGET are all in line. The assumption is that when you pull the trigger, what is in line is what gets shot. Clearly, as shown in the 2nd illustration above, the gun is looking at a totally different line of sight.

By way of example

To force the scenario of the 1st illustration, we must make it impossible to see the bead with the “wrong” eye. The image below shows the fibre optic buried deep inside the sight body. You can only see the fibre optic from these vent rib shotgun sights if you look axially into the body. The eye nearest the shoulder the gun is mounted is the only eye that can look axially into the vent rib shotgun sight. The other eye is prevented from viewing the fibre optic by the body of the Sight.

It doesn’t matter if you are Left or Right eye dominant, you will only see the Fibre Optic from the “correct” eye. The correct eye is the eye nearest to the gun, the complete opposite happens if you mount your gun on the other shoulder! Our dominance solving shotgun sight is ambidextrous!

Many shooters are aware they are cross eye dominant and to try to solve the problem by closing one eye. As mentioned earlier, this caused another massive problem. What that does is to ensure the EYE + BEAD + TARGET was all in line as it should be. Unfortunately they are now without the ability to judge distance and speed having lost the phenomenon of stereoscopic vision.

Shooting moving targets

Shooting a moving target requires two MUST HAVE attributes: A) The ability to judge distance, B) The ability to judge speed. There is only one way you can achieve both those attributes and that is to shoot with both eyes open. The error at range is considerable if you are not aware you are cross eye dominant. Assuming the Bead is 650 mm from your eye (at the end of the barrel) and your left eye is 64 mm from your right eye, that subtends an angle of error of 5.5 degrees. At a range of 30 Metres, this equates to an error of 2.9 Metres (114″). If you know you are cross eye dominant, and you want to keep your stereoscopic vision, then these Fibre Optic Shotgun Sights from CADtec3D is the answer!

Why won’t this Fibre Optic Gunsight ever fall off your vent rib?

Unlike some designs, these Fibre Optic Shotgun Sights will not fall off your vent rib. We know this an issue with many Sights available.

In the image below you will notice the screws are at an angle. This ensures the Fibre Optic Shotgun Sights are captivated on the vent rib. Many Sight designs try to put the screws against the rib at 90 degrees. This relies solely on friction to retain the Sight. In order for that to work, the screws have to dig-into the Vent Rib. As the shotgun’s Vent Rib is very tough compared to the screws, the screws will never “dig-in”. The result is in a short space of time, the sight will fall off. But NOT our dominance solving shotgun sight. No force is needed against the vent rib, just a slight touch and the Sight is locked in place. The 10-degree angle of the screw takes care of that. The screw lock insert (see section below) stops it vibrating loose.

Q. But what if the screw/s come loose?

We now fit every Sight with special Stainless Steel Heli-Coil Screw-Lock Inserts. These inserts have a resilient locking mechanism that grips the screw preventing it from vibrating loose due to vibration. If you decide to remove the Sight there is no need to apply thread Locker.

How does it work?

You will see from the image below that the central coil shown coloured silver has “straight” segments or “chords”. When the screw enters, these chords flex outwards creating pressure on the screw preventing it from unwinding.

The Fibre Optic Shotgun Sights functionality:

Our recommended way of using the Eye Dominance Solving Shotgun Sight

Mount your gun and hard focus on your Sight, positioning your gun until you see a full circle light. This indicates your gun is aligned. Now, do not hard focus on your Sight anymore. Hard focus on your Target, or at the distance you know the target will be. This is critical. You only need to be “AWARE” of the disc of light in your “SECONDARY” vision to know you are aligned. “BOTH EYES” must be open all the time and hard focused on, or where the target will be.

Stereoscopic vision (also known as Binocular vision) gives you the ability to judge speed and distance which is an imperative attribute to have to consistently hit moving targets. It only works when both eyes are open!

If within 30 days from purchase you are unhappy with your dominance solving shotgun sight for whatever reason, simply return it and we will refund your money 100% no questions asked!

No Gun smithing required to fit your Sight.

If you have any questions at all, feel free to call or email us using the contact info at the very top of the page. We will get back to you as soon as we can!

Even if you decide not to purchase, thank you for your interest from the CADtec3D team.